Interesting Facts About Stucco Nobody Has Ever Told You
If your home improvement project involves stucco in Summerlin South, you will want to be sure you find the right contractor for the job. It is always important to hire good contractors, but it is especially important when they will be doing work such as stucco installation, which is not as common as other contracting duties. You need to work with a people who know how do to the job properly, so you can be sure it will get done right the first time.
When you get the bids, make sure to ask if the work will be guaranteed once it is completed. A quality stucco contractor will stand firmly behind their work, so don’t hesitate to ask this question. If the labor and material are not covered by some form of guarantee, you should quickly move on to the next bid. There are plenty of contractors out there who are willing to stand behind their work, so there is no reason to work with one who isn’t.
Stucco can be messy business. Make sure there is a plan in place to protect the rest of your property from the mess that can be made when stucco is put in. You don’t want to be left with a huge cleanup project after your contractor has left the job site, so ask specific questions as to how they will keep the rest of your property as clean as possible.
Hiring a stucco contractor doesn’t need to be a long and drawn out process, as long as you know what you are looking for from the start. Use the points above to guide your search, and only hire a contractor once you are fully satisfied that they are the perfect selection for the work that you need completed.
Interesting Facts About Stucco Nobody Has Ever Told You
Stucco has been use to protect and decorate exterior and interior walls and ceilings for many centuries. Stucco is available in dozens of textures, thousands of colors and is currently the cladding of choice for most new construction and remodel or restoration projects.
The two main categories of exterior stucco that encompass dozens of different systems are Hard Coat Stucco and EIFS (Exterior Insulation and Finish System). Hard Coat Stucco is the preferred system for residential or multifamily construction, and is being used increasingly for commercial projects since it is more economical. EIFS is more commonly used for commercial building projects, but is often also used for high-end custom homes.
Hard Coat Stucco is typically applied in 2-3 coats with a cementitious base coat. Two commonly used hard coat stucco systems are called One Coat Stucco and Three Coat Stucco. Traditional Three Coat Stucco consists of two coats of a cement base and one finish coat. One Coat Stucco is actually a two-coat process but instead of two base coats it consists of one cementitious base coat with one finish coat. In the last few decades One Coat Stucco has become much more popular simply because of the cost. The materials used and application process are virtually the same for both systems, other than the exception of One Coat Stucco taking fewer steps and less time. The design ability and performance between the two systems are also the same, although Three Coat Stucco is typically stronger and will crack less in most circumstances.
The finish coat application of both hard coat systems is the same. There are numerous finish options but they can be consolidated into a few categories which are: Integrally Colored Stucco, Painted Stucco, and Acrylic Finishes. Colored cement finishes or "colored stucco" was the popular choice over Three Coat Stucco for most of the 20th century. It is simply a mixture of cement, lime, sand and pigment. It is inexpensive and easy to apply, however, if the base coat cracks the finish is almost guaranteed to crack. Colored Stucco will stain easily, is hard to repair, and allows water to pass freely through it (which can be good or bad depending on what part of the country the system is applied within). It is usually applied by hand and can achieve virtually any finish imaginable.
Painted Stucco has been around almost as long, and is the majority of the finishes being used today. Painted Stucco is the same mixture of materials less the color, so it is applied the same and will achieve all the textures that integrally colored stucco will. The final step with Painted Stucco is the paint application. The paint, or as some like to call "coating", will look more vibrant and is easier to patch. Color options are vast and it is important that a good quality stucco paint is used. The most desired stucco finish today is Acrylic Stucco or Acrylic Finish. Some will call this system Synthetic Stucco, which is somewhat correct since it is a synthetic finish, however it is not a synthetic system.
Acrylic Finish is available in as many colors as a paint and has the same chemical make up as paint, but is a much thicker application. This does raise the cost of the overall system, but offers many benefits that the other two finishes do not. Acrylic Stucco will bridge most all hairline cracks and does not allow water to travel freely into the system, which is a huge benefit in freeze/thaw zones. Acrylic Stucco will keep it's look and typically will not require any maintenance for many years, whereas painted stucco must be repainted and repaired within a few years. Colored Stucco stains easily, will show every crack and is very difficult to repair.
EIFS is a full synthetic system or what most will call Synthetic Stucco. EIFS systems weigh much less than traditional stucco and are much more flexible. Although most EIFS adhesives and base coats are cement based, they are heavily polymer modified so they are considered synthetic. These type of systems have been used successfully for many decades but are much newer in the stucco world. Most all EIFS systems use EPS (Expanded Polystyrene) insulation board which is usually adhesively attached to the substrate and sometimes mechanically attached. The EPS adds insulation to the wall assembly, absorbs movement better than any other stucco cladding used today, and adds many design options.
The original or traditional EIFS systems all used a cement-based adhesive and/or mechanical fasteners for the EPS, fiberglass netting for reinforcement and to gauge base coat thickness, cement base coat, and an acrylic finish. These systems are known as Barrier EIFS. Since these systems are so watertight, they've had some problems such as not allowing water to escape after it had travelled into the system because of improper application and flashing. The industry quickly designed Drainage EIFS or Water Managed EIFS which some manufacturers had and promoted before these issues arrived. Drainage EIFS systems have been very popular in recent years and include added or altered components such as notched or channeled EPS, plastic trim, trowel or roller-applied waterproof coatings. These systems seem to have remedied the water drainage problem of years past. The finish coat options for EIFS are not as vast as they are for Hard Coat Stucco. Since EIFS is a "soft system" or synthetic system, cement finishes will not work unless they are acrylic or polymer modified.
Most EIFS manufacturers have their recommended systems and will not warranty their products if deviated from the original specifications. Almost every final coat for EIFS consists of an acrylic emulsion and marble or silica sand finish that is hand-troweled over the base coat. Acrylic finish is integrally colored and very flexible. There are a few standard textures that acrylic finishes provide, including Smooth Finish, Sand Finish, and Rilled or Swirl Finish. These finishes, which are expensive, are usually applied in one coat at a thickness of 5/32" or less. Many different textures are possible by multilayering an acrylic finish.
Three Types of Stucco Finishes
The stucco method of repair work is an absolute must for people in the maintenance field. Holes in the wall just seem to happen. Cracks in plaster ceilings can be a nightmare to repair. Any one who has owned an apartment building know the value of someone with the ability make these repairs.
When you do have a hole in a wall or ceiling, first thing is to back the hole with something so the stucco doesn't fall through. Holes up to the size of what a doorknob might make, can be repaired in this way. After filling the hole with backing, use Sheetrock compound or plaster to fill the hole even or a little above the surface of the wall. A 6 inch putty knife is great to start with.
Next apply Sheetrock tape over the hole and past the edge at least several inches. Use the putty knife to push the tape into the wet mud. Apply a second coat of compound or plaster over the tape. Now we wait. A household fan can be used to help speed the drying time.
Your repair is dry when it turns completely white, do not try to sand or make it any smoother while it's drying. This will only make a mess you'll have to sand out later. You'll have plenty of time to make it right on the next coat.
Apply another coat of your product over the first. This time use a ten inch putty knife and expand the layer you put on past the edge of the previous coat. First pull the knife across the repair centered. Next pass, you'll stay half on and half off your patch putting slightly more pressure on the half off, this will smooth the edge. Then repeat the half on half off method on the other half, making sure to always put more pressure on the half that's off.
If you have a badly cracked ceiling, this type of repair can be used to skim coat a small area or an entire ceiling. Repairs to cracks can be made in the same way as we fixed the hole. A vinyl adhesive caulking, can take the place of our newspaper. This will help to keep the cracks from reappearing. Tape is also not necessary with this method.
If you have loose plaster. Ceiling washers as their called are available at most hardware stores as well as building supply houses. These are a large beveled fender washer with a hole in the center. Using a Sheetrock screw they can pull loose plaster back to their lathes. These small beauties can turn a rip out job into a repair job, saving thousands of dollars.
After caulking your cracks, run the six inch knife across them with compound, or plaster. Apply thin coats and make sure to let them dry thoroughly between coats. Keep using a larger knife with each coat. The feathering technique explained before runs true here. Have fun with it. Remember one very important thing, when you stucco the next coat can fix anything.