Repair Damaged Stucco in Sloan, Nevada

Reasons Why You Should Use Stucco Siding

If your home improvement project involves stucco in Sloan, you will want to be sure you find the right contractor for the job. It is always important to hire good contractors, but it is especially important when they will be doing work such as stucco installation, which is not as common as other contracting duties. You need to work with a people who know how do to the job properly, so you can be sure it will get done right the first time.

Textures for Stucco

When you get the bids, make sure to ask if the work will be guaranteed once it is completed. A quality stucco contractor will stand firmly behind their work, so don’t hesitate to ask this question. If the labor and material are not covered by some form of guarantee, you should quickly move on to the next bid. There are plenty of contractors out there who are willing to stand behind their work, so there is no reason to work with one who isn’t.

Stucco can be messy business. Make sure there is a plan in place to protect the rest of your property from the mess that can be made when stucco is put in. You don’t want to be left with a huge cleanup project after your contractor has left the job site, so ask specific questions as to how they will keep the rest of your property as clean as possible.

Sealing Stucco

Hiring a stucco contractor doesn’t need to be a long and drawn out process, as long as you know what you are looking for from the start. Use the points above to guide your search, and only hire a contractor once you are fully satisfied that they are the perfect selection for the work that you need completed.

How to Repair Synthetic Stucco

As it happens the next generation of EIFS has learned a lot from the last generation

From 1969 to about the year 2000 was the first generation of EIFS where the EIFS foam was installed directly to the substrate of a house. Where the EIFS exterior itself was the weather barrier. Before the year 2000 building codes did not require a secondary moisture barrier. The IRC (International Residential Code) in 2000 required this secondary moisture barrier on all sidings used over wood framed construction. The problem with the EIFS itself being the water barrier is that when any moisture infiltrated the system there was nowhere for it to escape. A properly installed first generation EIFS application that has been maintained has a very good chance of not having any problems. The EIFS can be done right, and the caulk and sealants maintained over the years, and still a window or roof leak can cause major damage over time on a first generation EIFS home. However, you can still have a first generation EIFS home inspected, and after passing the inspection get a warranty on the home through The Moisture Warranty Corporation.

The Next Generation of EIFS has grown and learned from the past along with the entire building industry. The unprecedented testing done has helped many industries, and has had an impact on the building codes. With the addition of a Air/Water barrier to the EIFS process has made significant improvements to the overall performance of EIFS, and is now mandatory on all wood framed construction whether you are using EIFS or not. The next generation of EIFS has been proven to drain water effectively. This overcomes the major issue with first generation EIFS.

The Next Generation of EIFS is a superior material, and out preformed all other exterior wall claddings (including brick, stucco, concrete block, and cementitous fiber board siding) in the Hygrothermal Performance testing by Oak Ridge National Laboratory, which was funded by The US Department of Energy and EIMA. A study by The National Institute of Standards and Technology (NIST) shows that over a 50 year life cycle of a building, the carbon footprint of EIFS is 1770 compared to brick at 8303. We are talking some huge numbers here, as Dryvit, one of the leading manufacturers, boast 'over 2 billion square feet of EIFS applied' you can begin to imagine what a positive impact having such a smaller carbon footprint has had on the environment.

Benefits of The Next Generation of EIFS - Superior Cladding


  • Thermal bridging virtually eliminated

  • Improved IAQ (Indoor Air Quality)

  • Improved overall energy performance of a building

  • Helps keep structural members at a consistent temperature, which extends life expectancy

  • The constant temperature helps structure member movement and stress from temperature swings that lead to cracking in concrete and stucco walls.

  • Dewpoint is eliminated

  • Vapor diffusion from condensation is minimized

  • Deterioration of batt insulation from condensation is minimized

  • Mold growth due to condensation is virtually eliminated

  • Rusting of metal fasteners and framing from condensation is minimized

  • EIFS has low levels of volatile organic compounds as know as VOC's

  • EIFS carbon footprint is 5 times smaller than brick

  • EIFS saves money in construction costs

  • EIFS is more energy efficient

  • ASHRAE (American Association of Heating, Refrigeration, and Air-conditioning Engineers) Standard provides minimum requirements for energy efficient design of buildings - EIFS meets these requirements

  • According to ASHRAE 90.1 2001 - 2 inches of EIFS offers the equivalent energy efficiency performance of 8 inches of fiberglass insulation in a wall cavity.

  • EIFS puts the continuous insulation on the outside of the building where insulation works best.

  • EIFS is in the International Building Code and the International Residential Code

  • EIFS provides the continuous insulation (CI) described in ASHRAE 90.1, which is required by the International Energy Conservation Code (IECC)

  • EIFS can contribute to LEED certification

  • EIFS is the only cladding that has an air-barrier, insulation and aesthetics all in one system, which is installed by a single contractor, with a single warranty

  • EIFS has a very low Global Warming impact, where brick has a very high Global Warming Impact

It may not be faster than a speeding bullet and it can not leap tall buildings, but The Next Generation of EIFS is a Super Cladding when compared to the other leading Claddings.

Exterior Plaster Finishes

Stucco Options

There are three common types of stucco finishes you might choose from when applying the exterior wall to your home. These finishes include wet dashes, dry dashes, and float finishes.

The wet dashes include many different variations of stucco finishes you might choose to apply to your home. These finishes include the rough cast, pebble dash, spatter dash, broom dash, and even the sand dash. The pebble dash or the rough cast is simple to obtain by throwing the mixture on to the wall by using a paddle. The mixture will include grout and pebbles. You will throw the mixture against the fresh coat of mortar.

The spatter dash can be obtained in a similar fashion but instead using a thinner mixture of cement and coarse sand. Some people choose to use stone screenings instead of sand. This mixture is dashed against the mortar. The sand spray and the broom dash mixtures are used by actually applying the mixture to the mortar by using a long fiber brush or a whisk broom. You do not throw the mixture but apply it. The reason these finishes are called wet finishes is because you apply the finish to the mortar while it is still fresh.

The dry dash stucco finish is another common finish people prefer on their house. When obtaining the dry dash look, you will throw clean pebbles, pieces of shell, or even stone chips against the mortar right before it is hardened. It is important to try to uniformly distribute the mixture across the wall so the outcome looks nice. In most cases, you will have to push the pieces of rock into place by using drywall finishing tools like a float. However, you should not rub the surface once the pieces are embedded into the mortar. The dry dash is a more difficult finish to apply because it takes more time and you have to be more careful to evenly distribute the rocks and pebbles.

Float stucco finishes are another popular option to use on the exterior wall of a home. This type of finish is accomplished by applying the coating once the mortar has begun to harden. This type of finish requires a thin finish coat and needs to be straightened before you begin floating. Once the stucco has begun to stiffen, water needs to be dashed on the surface with a brush. Float finishes are performed by professional workmen with experience and skill. Not many homeowners attempt to do this type of finish on their home.

There are three different types of stucco finishes you might choose from if you are looking for a new siding for the exterior of your home. These types of finishes include wet dashes, dry dashes, and float finishes. Wet and dry dashes are the most common if you are thinking of performing this project on your own. If you would like a float finish on the outside of your home and you have never done this before then you might consider hiring a professional to assist you.

Stucco Replacement Cost

Stucco Repair in Las Vegas, Nevada