How to Pebble Dash a Wall
If your home improvement project involves stucco in North Las Vegas, you will want to be sure you find the right contractor for the job. It is always important to hire good contractors, but it is especially important when they will be doing work such as stucco installation, which is not as common as other contracting duties. You need to work with a people who know how do to the job properly, so you can be sure it will get done right the first time.
When you get the bids, make sure to ask if the work will be guaranteed once it is completed. A quality stucco contractor will stand firmly behind their work, so don’t hesitate to ask this question. If the labor and material are not covered by some form of guarantee, you should quickly move on to the next bid. There are plenty of contractors out there who are willing to stand behind their work, so there is no reason to work with one who isn’t.
Stucco can be messy business. Make sure there is a plan in place to protect the rest of your property from the mess that can be made when stucco is put in. You don’t want to be left with a huge cleanup project after your contractor has left the job site, so ask specific questions as to how they will keep the rest of your property as clean as possible.
Hiring a stucco contractor doesn’t need to be a long and drawn out process, as long as you know what you are looking for from the start. Use the points above to guide your search, and only hire a contractor once you are fully satisfied that they are the perfect selection for the work that you need completed.
Home Stucco Construction Project Timing - Doing it Right Vs Right Now
The stucco method of repair work is an absolute must for people in the maintenance field. Holes in the wall just seem to happen. Cracks in plaster ceilings can be a nightmare to repair. Any one who has owned an apartment building know the value of someone with the ability make these repairs.
When you do have a hole in a wall or ceiling, first thing is to back the hole with something so the stucco doesn't fall through. Holes up to the size of what a doorknob might make, can be repaired in this way. After filling the hole with backing, use Sheetrock compound or plaster to fill the hole even or a little above the surface of the wall. A 6 inch putty knife is great to start with.
Next apply Sheetrock tape over the hole and past the edge at least several inches. Use the putty knife to push the tape into the wet mud. Apply a second coat of compound or plaster over the tape. Now we wait. A household fan can be used to help speed the drying time.
Your repair is dry when it turns completely white, do not try to sand or make it any smoother while it's drying. This will only make a mess you'll have to sand out later. You'll have plenty of time to make it right on the next coat.
Apply another coat of your product over the first. This time use a ten inch putty knife and expand the layer you put on past the edge of the previous coat. First pull the knife across the repair centered. Next pass, you'll stay half on and half off your patch putting slightly more pressure on the half off, this will smooth the edge. Then repeat the half on half off method on the other half, making sure to always put more pressure on the half that's off.
If you have a badly cracked ceiling, this type of repair can be used to skim coat a small area or an entire ceiling. Repairs to cracks can be made in the same way as we fixed the hole. A vinyl adhesive caulking, can take the place of our newspaper. This will help to keep the cracks from reappearing. Tape is also not necessary with this method.
If you have loose plaster. Ceiling washers as their called are available at most hardware stores as well as building supply houses. These are a large beveled fender washer with a hole in the center. Using a Sheetrock screw they can pull loose plaster back to their lathes. These small beauties can turn a rip out job into a repair job, saving thousands of dollars.
After caulking your cracks, run the six inch knife across them with compound, or plaster. Apply thin coats and make sure to let them dry thoroughly between coats. Keep using a larger knife with each coat. The feathering technique explained before runs true here. Have fun with it. Remember one very important thing, when you stucco the next coat can fix anything.
Stucco House Problems
Stucco is also known as 'Portland cement plaster'. It is generally used in building repair, to repair leaky windows, decorate exteriors or for any other decorative purposes. Restoration companies use it for restoration projects as it is widely available in various textures and colors.
Exterior stucco can be classified into two types, hard coat stucco and exterior insulation & finish system. Hard coat stucco is commonly used for homes. It is generally cheap, thus gaining popularity for commercial projects. It is a little expensive comparatively and is mostly used in commercial constructions.
Hard coat stucco is generally applied in one coat, two coats and three coats together with a cement base. Three coat system provides 2 rough coats with cement and one finish coat while the one coat process provides the facility of one rough coat and one finish coat. One coat process is much simpler, cheaper and time saving, hence gaining popularity these days. One coat system provides almost the same benefits of three coat system. However, three coat process is much tougher than the other and can withstand cracks in most critical weather conditions.
1. Attractive Look: Stucco can increase the looks of a house. Therefore, it is preferred to use in the interiors of the home. The different design and stonework can add tremendous beauty to your home. Its use is equally appreciated for exterior parts of your house. Various pigments are available to enhance its beauty further.
2. Reduced Cost and Maintenance: It is generally cheaper than other available building materials. It is also maintenance free in comparison to other construction materials and far better than paint. For painted surfaces, you consistently need maintenance which makes it more costly. Stucco applied surfaces don't need any fixes or maintenance for many years. Pigments can be used after it has completely dried.
3. Highly Durable: No building material can beat the durability of the stucco. If applied correctly, it can stand for many years without any maintenance. Seeking professional assistance for such project is a good choice.
4. Architectural styles: Stucco can be used in different architectural styles, especially Spanish. However, an expert artisan can produce great design work using stucco.
5. Good Weather Repellent: Stucco is best for extreme weather conditions and is extremely helpful in blocking rain water. This is fire proof and thus your home can withstand against heat damages.
It is mandatory to use stucco siding correctly in order to utilize its full benefits. You can consult professional services to help you out in this regard.