Stucco Repair Companies in Enterprise, Nevada

How Do You Select the Best Stucco Repair Company in Enterprise?

So you’ve made the decision to have stucco applied to your home. Or, maybe you just need a repair. Either way, you’ll need to look up stucco contractors in Enterprise so that the project can be completed. You may be tempted to just open up a phone book and call the first contractor with a big ad, but that is not the way to go. Just about anyone can take out an ad, and having a larger one only means that they spent a little more money on advertising. Like any other skilled trade, learning how to apply stucco is not only an art but a science as well. Having the proper insurance, bonding, employees, portfolio of satisfied clients and ethical business practices should be the criteria you base hiring a contractor on. Doing an initial background check on a potential contractor now will save you copious amounts of work later.

Stucco Renovation

First, you need to establish exactly what your project will entail. Then you need to contact a few contractors and ask them for a cost quote. It’s a good idea to let them know right away that you are going to be speaking to several contractors to see what their bids are. This can save you time when trying to negotiate a good price. Throw in some terminology about your specific project if you can. You will appear to be more knowledgeable than the average customer, so you will be less likely to be taken advantage of. Once you have gotten a few quotes, look for the median price. A good contractor will price fairly. Too low of a price may indicate an inexperienced contractor, while a high price may be a predatory contractor. Find the three or four contractors that are close to the median price and contact them for more information.

Exterior Plaster Finishes

Qualified stucco contractors will have up to date insurance and licensing. This information will either be on hand, or in their office. Asking to view or make a copy of their paperwork is neither rude nor uncommon. If a contractor acts insulted or repeatedly gives excuses as to why the paperwork cannot be produced, you probably shouldn’t do business with them. Whether these are stalling tactics or they are just really unorganized, they are indicators of an unprofessional business person.

How to Cover Exterior Brick With Stucco

Stucco weatherproofs and hides an exterior brick wall's imperfections. Stucco, a cement-based wall covering, bonds to the brick's pores and fills its mortar joints. An exterior brick wall covered with stucco uses a base coat and a finish coat. The base coat, sometimes called a scratch coat, protects the brick wall from the elements and provides a smooth surface for the finish coat. The finish coat gives the stucco its texture. Before applying stucco to a brick wall, repair all damaged brick mortar and reinstall any loose bricks.

Resources

  • Portland Cement Association: Stucco FAQ's

You May Also Like

  • Can Mortar Be Used to Cover Brick?

    Bricks and mortar are the main ingredients of every red brick building standing anywhere in the world. They are a time tested...

  • How to Texture Walls

    A great technique for uneven walls is to add a texture treatment. Textured walls camouflage cracked plasters and uneven surfaces as well...

  • How to Cover a Brick Fireplace

    Covering a brick fireplace can really change the feel of a room. Perhaps the style of the brick too dated for your...

  • How to Make Stucco Look Like Brick

    Brick walls are attractive and very popular features in many homes, but can be expensive to install. There is a way to...

  • How to Plaster Brick Walls

    A lot of people have that one (or more) unsightly brick wall they just don't know what to do with. Maybe it's...

  • How to Cover Brick Exterior

    Brick homes are a staple of modern and classic construction. If you are looking to update your home, or to give the...

  • How to Cover Old Brick

    Old homes may have walls that are made of brick. Although a well-made brick wall can last for decades, maintaining it can...

  • How to Stucco a Brick Fireplace

    Stucco is a building material made from sand, Portland cement, lime and water. While it shares many characteristics with plaster, stucco is...

  • How to Cover Exterior Brick With Texture Paint

    Texture paint is a good choice for covering the rough surface of rustic or worn exterior bricks. Textured paints cover cracks and...

  • How to Cover Old Brick With Vinyl Siding

    Over time the brickwork on your house may start to look worn and faded. Installing vinyl siding over existing brick is an...

  • How to Stucco Over Brick Exterior

    Stucco can be applied to a variety of materials and surfaces. The great thing about applying stucco to brick is that much...

  • How to Make a Brick Interior Wall Smooth

    An interior brick wall can be a focal point in your home, or it can just as easily be an eyesore. Old,...

  • How to Stucco Over Painted Brick

    When you install stucco over painted brick you will not have to add too much to the process due to the changes....

  • Types of Exterior Wall Coverings

    Choosing the material for the exterior walls of your home is a personal choice. Learn what's available and some of the benefits...

  • Ideas for Hiding an Exterior Brick Wall

    There are several ways to hide an exterior brick wall that's become unsightly because of damage, stains or discoloration, or if you...

  • Fake Stone Exterior & Options for Covering

    Find fake or faux veneers and facades for your home exterior and roof in a variety of finishes and designs. Use faux...

Stucco Siding Panels

How to Choose the Best Stucco Contractor

If you are building a new house, then you will have to face a few annoying tasks in the process. One such task is, getting your house insulated. Insulation is one of the important jobs when building a new house, as it will save you from cold and moisture during the winter season. But, choosing the right type of insulation could be a lot frustrating, therefore I would suggest you that you should opt for the stucco insulation.

This is perhaps the most convenient and affordable way of getting your house insulated from all sorts of extreme weather. I would like to mention a few important facts related to stucco installation, which will help you get a better idea about this particular technique of insulation. Stucco insulation will create a permanent barrier in your house against all sorts of weather conditions.

I have seen many people using a metal backing before applying the stucco, which is a good practice. You can do the same with the help of a contractor, as they can finish the task quickly and easily. You will find a number of options when applying for this type of thing. This will prove to be a good barrier because it is applied in three different layers. A layer of spray is also applied to fill in all the holes that exist at the time of placing those layers.

You can't get such kind of insulation in a Styrofoam or fiberglass, like the one you get from the stucco insulation. Stucco is better because it has the ability to capture the empty spaces of the surfaces on which it is applied to. This is an important feature and must not be overlooked. You can use stucco in many different places where other insulation can't be used. There are a number of places where insulation needs to be done in a proper way or else, your home will not stay warm and dry.

I would like to tell you that there are so many options available for you these days regarding the best insulation. There is nothing much to worry about the mold that grows on the surface of the walls because stucco doesn't let that mold grow. Mold can create difficulties for people to breathe in the house and it is one of the most difficult things to get rid of as well. I have seen many houses in which the mold has done a lot of damage without even being coming into the notice of the members of the house. But, stucco will not let the mold grow, thus saving your house for a long period of time.

You can apply the stucco insulation on the exterior of the walls or sidings. There is a particular reason behind it, which is, it will work much better as a barrier than the insulating materials, which I have mentioned above. You must pay an extra attention towards having a good insulation for the building. The stucco installation will keep all the cold as well as the moisture out of the building.

The stucco insulation will acts as a water resistant, which is will not just help in keeping the flood out, but also the moisture that arises with the changes in the temperature, storms and many other things. It doesn't matter, what kind of reason is creating moisture, this insulation will eliminate all of it. Stucco is not something, which will wear off on its own, if you want to get rid of it, then you have to remove it. But, I don't see any reason to get rid of the stucco, as it provides so many benefits to you.


[tag] in Enterprise

Stucco Remediation Specialists in Enterprise, Nevada

The Many Benefits Of Stucco

If your home improvement project involves stucco in Enterprise, you will want to be sure you find the right contractor for the job. It is always important to hire good contractors, but it is especially important when they will be doing work such as stucco installation, which is not as common as other contracting duties. You need to work with a people who know how do to the job properly, so you can be sure it will get done right the first time.

ReStucco A House

When you get the bids, make sure to ask if the work will be guaranteed once it is completed. A quality stucco contractor will stand firmly behind their work, so don’t hesitate to ask this question. If the labor and material are not covered by some form of guarantee, you should quickly move on to the next bid. There are plenty of contractors out there who are willing to stand behind their work, so there is no reason to work with one who isn’t.

Stucco can be messy business. Make sure there is a plan in place to protect the rest of your property from the mess that can be made when stucco is put in. You don’t want to be left with a huge cleanup project after your contractor has left the job site, so ask specific questions as to how they will keep the rest of your property as clean as possible.

Textures for Stucco

Hiring a stucco contractor doesn’t need to be a long and drawn out process, as long as you know what you are looking for from the start. Use the points above to guide your search, and only hire a contractor once you are fully satisfied that they are the perfect selection for the work that you need completed.

Reasons Why You Should Use Stucco Siding

What's Stucco?

Stucco has been used in architectural structures since the Greek and Roman era and during the Renaissance. It spread throughout Europe and gradually became popular in America. Stucco is a finishing plaster composed of sand, lime, water and other ingredients. It is a strong, attractive and damage resistant covering for walls and ceilings. It is an excellent building material for hot areas as it helps to regulate the temperature. It is non-combustible and its surface burning properties include no flame spread and no smoke development.

Currently, there are two distinct types of Stuccoes -

Traditional/Hard Coat Stucco - This is basically cement mixed Stucco. The traditional stucco is durable and able to withstand harsh environments. It is porous and can breathe, so, dries quickly and resists water damage.

Conventionally, lime was used with sand and water. As lime is slightly soluble, the mixture has a self-healing tendency. At present, stuccoes are usually made up of Portland Cement, sand and water resulting in a hard and brittle variety.

To install hard coat stucco, first the substrate is installed followed by a metal lath and then a coat of stucco is applied with a trowel. It is allowed to set and then another coating is applied. Normally, the process involves a scratch coat, a brown coat and a finish coat (may be colored).

Stucco can also be applied on a paper and wire. The coats should be thicker. The first coat (scratch coat) covers the wire. It needs to be scratched as soon as it sets. The second coat (brown coat) gets bonded to this coat and as usual the finish coat is the outermost layer.

Synthetic Stucco - Since 1950s, a number of houses were built using a variety of synthetic materials resembling stucco. Fibers and synthetic acrylics were added to the cement stucco mixture to add strength and flexibility. In general though, the synthetic stuccoes are less heavy and hence, more susceptible to a hard blow. They are a one-coat stucco system unlike the three-coat traditional ones.

The most common one is EIFS or Exterior Insulation & Finish Systems. They are glued or mechanically attached to the substrate and usually composed of three layers. The innermost layer, mostly made up of polystyrene like material, is a foam insulation board. The second layer is a base coating attached to a fiberglass mesh and the final layer is a finish colored coat. It became popular because of its easy installation, low cost and better insulation properties. The only disadvantage is moisture absorption which causes water damage to the building.

A variety of stucco colors/paints are available. Colorants are inorganic pigments which can adapt with the high pH value of cement. They can be either natural like, Ochers and natural earths or artificial, such as man made Iron Oxides. Natural colorants remain unaffected to UV rays and are more pleasant to our eyes. But, the range of shades and the tinting strength is less when compared to manufactured colors. Man made colors, on the other hand, offer a wider range of shades such as dark blues and greens as well as various earthy tones like, yellow, brown and reds. They also possess excellent UV stability due to the presence of inorganic pigments.

Generally, $6-$9 per square foot is the effective cost for stucco installation. A proper inspection of the building is must before the installation. It is always advised to use a better quality beforehand rather than paying later for damage repair.

Stucco Renovation

Interesting Facts About Stucco Nobody Has Ever Told You

Aside from roofing failure, the most common source of moisture entering residential community properties is failure of the siding material. In southern California, most siding consists of stucco. Unfortunately, stucco siding systems leak!

Why do builders specify stucco so often?

Stucco became popular in the United States in the early 1800's as an inexpensive and effective means of exterior wall covering over concrete, brick or stone. Today most stucco involves a less expensive method of application; instead of brick or stone, it is applied over open frame construction. "Open frame" means that paper and lathe reinforcement resembling chicken wire is laid over wood-framed walls without sheathing, and then coated with three applications of plaster. This is a low-cost technique, but it has pitfalls.

When you look at a stucco wall, all you see is plaster. The plaster does not keep your home dry; it just protects the waterproofing paper. Yes, paper. In 90 percent of the exterior wall area, all that is keeping your unit dry is paper that is thinner than a business card. Because stucco acts like a sponge, water gains access to the protective paper flashing and will leak into your wall cavity at any tear, backward lap or voided area of the paper.

Almost all stucco leaks can be traced to application error. Errors occur when paper, flashing, windows and other components do not properly overlap (flash) the items directly below them. Leaking will also occur from paper and flashing degradation due to age or excessive moisture entering. Remember, most stucco leaks do not show up on the interior of your unit; the 6-inch space between the stucco and your interior drywall - consisting of fiberglass insulation and wood framing - can hold a lot of water before it shows on the interior. When this occurs, you can expect mold, dry rot and termites to follow.

Leaking within stucco walls usually originates from one of the following sources:

Windows

Window leaks in stucco walls are among the most common flashing failures within the entire building structure. These leaks occur from two basic sources: failure of the window frame mechanism itself or improper lapping of the stucco's protective paper system onto the window flanges. Repair commonly requires rehabilitation of the window frame or removal of stucco surrounding the window to correctly apply the paper flashing system.

Miscellaneous wall penetrations

Vents, hose bibs, electrical outlets and light fixtures in stucco walls create a flashing problem during construction. Most of these do not have adequate flanges to overlap the paper flashing properly and were not properly sealed during construction.

Fascia and trim wood

In the past, a common mistake made by builders was to terminate the paper protective system at the point of the fascia board (trim wood) located under the roofline. As the wood ages, it shrinks and splits, allowing moisture to go behind the wood and into the wall.

Wall base leaking

Since stucco acts like a sponge and holds water, it needs to have a "release" flashing at the bottom of the wall, commonly called "weep screed." Most multi-unit complexes constructed prior to 1970 did not have weep screed installed. In many of these structures, trapped water is channeled into the bottom plate of the wall.

Even when weep screed flashing is installed, exterior planter systems are often raised to a level higher than the flashing or the interior floor line. When this occurs, water is forced into the wall structure.

Retrofitted flashing installations

Most managed properties have retrofitted doors, windows, fixtures or repairs that were completed after the original construction. When the stucco around these is patched, the new flashing paper is often overlapped incorrectly, or the old, brittle paper is damaged so much that it is impossible to do proper overlapping. As the new plaster settles and cracks due to improper fastening of wire reinforcement, water finds its way through the plaster and paper and into the wall cavity.

Stucco cracking

Stucco walls often exhibit cracking at windows, doors or open field areas within the wall. While cracking doesn't necessarily indicate failure of the weather-protection system, the increased exposure to rain water and air-borne pollutants cause the paper to prematurely rot and fail thereby allow moisture intrusion.

Methods of Repair

The difference in cost between repair options can be staggering, so it is critical to seek out an expert in diagnosing and designing an effective solution. Here are three repair options to consider, listed from most to least expensive:

Wall rebuild

Completely rebuilding a 20-foot by 20-foot section of stucco wall with new flashing may cost between $10,000 and $23,000. Fortunately, this type of repair is seldom necessary. My own company completely rebuilds exterior walls less than 1 percent of the time when addressing stucco failure.

Sectional rebuild

Perhaps the most common type of stucco repair involves removing sections of stucco around windows or flashing transition areas, then applying new flashing, wire reinforcement and plaster. This technique requires meticulous and intensive labor during the demolition and reapplication process. It should include using bituthene pliable membrane at all corners, horizontal surfaces and flashing transition areas. The cost to rebuild three or four flashing transition areas within the same 20-foot by 20-foot section of stucco may cost between $3,000 and $12,000 depending upon the quality of the repair. Doing the job right takes time, which is why this method has the highest failure rate of the three options. In a poorly done rebuild, the new paper flashing is not entirely lapped under the salvage edge of the old paper, and often the lathe wire reinforcement is compromised.

Non-invasive repair

Even when failing sections of stucco and flashing are replaced, the walls can leak due to aging of the surrounding areas of stucco where the paper flashing system is disintegrating. A successful solution is to inject all window, door and miscellaneous flashing penetrations with pliable, durable urethane rubber. The entire wall is then coated from base to roof using an elastomeric coating system such as Thorolastic. Elastomeric coatings waterproof the exterior of the wall and therefore eliminate the necessity to remedy the worn paper flashing system. Repairing a 20-foot by 20-foot section of wall using urethane injection and elastomeric coating may cost between $2,500 and $5,500. When using coatings it is critical that the repair area extends to the roofline so no moisture can become trapped within the stucco. Elastomeric coatings should be reserved only for walls with a history of leaking.

Although troubleshooting leaking stucco walls can be difficult due to the nature of the underlying flashing system, water testing can often provide effective results. Such testing pinpoints failure behind stucco over 95 percent of the time.

Stucco is not going anywhere. You and I will move into our next homes, and chances are they too will be stucco. Fortunately, newer homes are being built with greater care and higher standards. But when leaks do occur, it is important that the method of repair is effective and affordable.

Exterior Plaster Finishes

Stucco Repair Companies in Enterprise, Nevada