What Is Stucco And Why Is It On A Home's Exterior?
If your home improvement project involves stucco in Anthem, you will want to be sure you find the right contractor for the job. It is always important to hire good contractors, but it is especially important when they will be doing work such as stucco installation, which is not as common as other contracting duties. You need to work with a people who know how do to the job properly, so you can be sure it will get done right the first time.
When you get the bids, make sure to ask if the work will be guaranteed once it is completed. A quality stucco contractor will stand firmly behind their work, so don’t hesitate to ask this question. If the labor and material are not covered by some form of guarantee, you should quickly move on to the next bid. There are plenty of contractors out there who are willing to stand behind their work, so there is no reason to work with one who isn’t.
Stucco can be messy business. Make sure there is a plan in place to protect the rest of your property from the mess that can be made when stucco is put in. You don’t want to be left with a huge cleanup project after your contractor has left the job site, so ask specific questions as to how they will keep the rest of your property as clean as possible.
Hiring a stucco contractor doesn’t need to be a long and drawn out process, as long as you know what you are looking for from the start. Use the points above to guide your search, and only hire a contractor once you are fully satisfied that they are the perfect selection for the work that you need completed.
What to Know About Exterior Stucco Contractors
Stucco has been use to protect and decorate exterior and interior walls and ceilings for many centuries. Stucco is available in dozens of textures, thousands of colors and is currently the cladding of choice for most new construction and remodel or restoration projects.
The two main categories of exterior stucco that encompass dozens of different systems are Hard Coat Stucco and EIFS (Exterior Insulation and Finish System). Hard Coat Stucco is the preferred system for residential or multifamily construction, and is being used increasingly for commercial projects since it is more economical. EIFS is more commonly used for commercial building projects, but is often also used for high-end custom homes.
Hard Coat Stucco is typically applied in 2-3 coats with a cementitious base coat. Two commonly used hard coat stucco systems are called One Coat Stucco and Three Coat Stucco. Traditional Three Coat Stucco consists of two coats of a cement base and one finish coat. One Coat Stucco is actually a two-coat process but instead of two base coats it consists of one cementitious base coat with one finish coat. In the last few decades One Coat Stucco has become much more popular simply because of the cost. The materials used and application process are virtually the same for both systems, other than the exception of One Coat Stucco taking fewer steps and less time. The design ability and performance between the two systems are also the same, although Three Coat Stucco is typically stronger and will crack less in most circumstances.
The finish coat application of both hard coat systems is the same. There are numerous finish options but they can be consolidated into a few categories which are: Integrally Colored Stucco, Painted Stucco, and Acrylic Finishes. Colored cement finishes or "colored stucco" was the popular choice over Three Coat Stucco for most of the 20th century. It is simply a mixture of cement, lime, sand and pigment. It is inexpensive and easy to apply, however, if the base coat cracks the finish is almost guaranteed to crack. Colored Stucco will stain easily, is hard to repair, and allows water to pass freely through it (which can be good or bad depending on what part of the country the system is applied within). It is usually applied by hand and can achieve virtually any finish imaginable.
Painted Stucco has been around almost as long, and is the majority of the finishes being used today. Painted Stucco is the same mixture of materials less the color, so it is applied the same and will achieve all the textures that integrally colored stucco will. The final step with Painted Stucco is the paint application. The paint, or as some like to call "coating", will look more vibrant and is easier to patch. Color options are vast and it is important that a good quality stucco paint is used. The most desired stucco finish today is Acrylic Stucco or Acrylic Finish. Some will call this system Synthetic Stucco, which is somewhat correct since it is a synthetic finish, however it is not a synthetic system.
Acrylic Finish is available in as many colors as a paint and has the same chemical make up as paint, but is a much thicker application. This does raise the cost of the overall system, but offers many benefits that the other two finishes do not. Acrylic Stucco will bridge most all hairline cracks and does not allow water to travel freely into the system, which is a huge benefit in freeze/thaw zones. Acrylic Stucco will keep it's look and typically will not require any maintenance for many years, whereas painted stucco must be repainted and repaired within a few years. Colored Stucco stains easily, will show every crack and is very difficult to repair.
EIFS is a full synthetic system or what most will call Synthetic Stucco. EIFS systems weigh much less than traditional stucco and are much more flexible. Although most EIFS adhesives and base coats are cement based, they are heavily polymer modified so they are considered synthetic. These type of systems have been used successfully for many decades but are much newer in the stucco world. Most all EIFS systems use EPS (Expanded Polystyrene) insulation board which is usually adhesively attached to the substrate and sometimes mechanically attached. The EPS adds insulation to the wall assembly, absorbs movement better than any other stucco cladding used today, and adds many design options.
The original or traditional EIFS systems all used a cement-based adhesive and/or mechanical fasteners for the EPS, fiberglass netting for reinforcement and to gauge base coat thickness, cement base coat, and an acrylic finish. These systems are known as Barrier EIFS. Since these systems are so watertight, they've had some problems such as not allowing water to escape after it had travelled into the system because of improper application and flashing. The industry quickly designed Drainage EIFS or Water Managed EIFS which some manufacturers had and promoted before these issues arrived. Drainage EIFS systems have been very popular in recent years and include added or altered components such as notched or channeled EPS, plastic trim, trowel or roller-applied waterproof coatings. These systems seem to have remedied the water drainage problem of years past. The finish coat options for EIFS are not as vast as they are for Hard Coat Stucco. Since EIFS is a "soft system" or synthetic system, cement finishes will not work unless they are acrylic or polymer modified.
Most EIFS manufacturers have their recommended systems and will not warranty their products if deviated from the original specifications. Almost every final coat for EIFS consists of an acrylic emulsion and marble or silica sand finish that is hand-troweled over the base coat. Acrylic finish is integrally colored and very flexible. There are a few standard textures that acrylic finishes provide, including Smooth Finish, Sand Finish, and Rilled or Swirl Finish. These finishes, which are expensive, are usually applied in one coat at a thickness of 5/32" or less. Many different textures are possible by multilayering an acrylic finish.
Three Types of Stucco Finishes
Stucco is a material used to cover concrete, brick or cinder block, primarily for exterior construction. Stucco is made of aggregate like sand or cement, binder and water and applied to a surface while it is wet. Often sprayed on, stucco hardens to a solid surface as is dries. Modern stucco often includes acrylic fiber and other synthetic materials that add strength and weather-proofing properties. Stucco stands up to many climates, and can last for decades. Stucco that has cracks, holes or other damage can be repaired by spraying on new stucco.
You May Also Like
- How to Apply Stucco Over Wood Siding
Stucco is a building material that is used to provide a textured finish to walls, ceilings and other surfaces. Its a great...
- How to Paint a Stucco House
Stucco is a building material that dates back to the ancient civilizations. A mixture of cement, sand and water, stucco is highly...
- How to Apply Stucco Over Old Stucco
Stucco is a building material made from Portland cement, sand, lime and water. It has been used for centuries to finish exterior...
- How to Remove Spray Paint From Stucco
In the old days, exterior painting projects took quite a bit longer than they do today. Before the advent of electric and...
- How to Apply Stucco Spray
Stucco spray is a simple and inexpensive way to conceal slight blemishes over large expanses of ceiling or walls. Workers typically perform...
- How to Tell If My Siding Is Synthetic Stucco
Synthetic stucco, also known as "exterior insulation and finishing system" or EIFS, has been used since the 1950s as a highly efficient,...