Stucco Contractors - Tips to Hiring Quality Contractors
If your home improvement project involves stucco in Spring Valley, you will want to be sure you find the right contractor for the job. It is always important to hire good contractors, but it is especially important when they will be doing work such as stucco installation, which is not as common as other contracting duties. You need to work with a people who know how do to the job properly, so you can be sure it will get done right the first time.
When you get the bids, make sure to ask if the work will be guaranteed once it is completed. A quality stucco contractor will stand firmly behind their work, so don’t hesitate to ask this question. If the labor and material are not covered by some form of guarantee, you should quickly move on to the next bid. There are plenty of contractors out there who are willing to stand behind their work, so there is no reason to work with one who isn’t.
Stucco can be messy business. Make sure there is a plan in place to protect the rest of your property from the mess that can be made when stucco is put in. You don’t want to be left with a huge cleanup project after your contractor has left the job site, so ask specific questions as to how they will keep the rest of your property as clean as possible.
Hiring a stucco contractor doesn’t need to be a long and drawn out process, as long as you know what you are looking for from the start. Use the points above to guide your search, and only hire a contractor once you are fully satisfied that they are the perfect selection for the work that you need completed.
How to Fix a Stucco Wall
The stucco method of repair work is an absolute must for people in the maintenance field. Holes in the wall just seem to happen. Cracks in plaster ceilings can be a nightmare to repair. Any one who has owned an apartment building know the value of someone with the ability make these repairs.
When you do have a hole in a wall or ceiling, first thing is to back the hole with something so the stucco doesn't fall through. Holes up to the size of what a doorknob might make, can be repaired in this way. After filling the hole with backing, use Sheetrock compound or plaster to fill the hole even or a little above the surface of the wall. A 6 inch putty knife is great to start with.
Next apply Sheetrock tape over the hole and past the edge at least several inches. Use the putty knife to push the tape into the wet mud. Apply a second coat of compound or plaster over the tape. Now we wait. A household fan can be used to help speed the drying time.
Your repair is dry when it turns completely white, do not try to sand or make it any smoother while it's drying. This will only make a mess you'll have to sand out later. You'll have plenty of time to make it right on the next coat.
Apply another coat of your product over the first. This time use a ten inch putty knife and expand the layer you put on past the edge of the previous coat. First pull the knife across the repair centered. Next pass, you'll stay half on and half off your patch putting slightly more pressure on the half off, this will smooth the edge. Then repeat the half on half off method on the other half, making sure to always put more pressure on the half that's off.
If you have a badly cracked ceiling, this type of repair can be used to skim coat a small area or an entire ceiling. Repairs to cracks can be made in the same way as we fixed the hole. A vinyl adhesive caulking, can take the place of our newspaper. This will help to keep the cracks from reappearing. Tape is also not necessary with this method.
If you have loose plaster. Ceiling washers as their called are available at most hardware stores as well as building supply houses. These are a large beveled fender washer with a hole in the center. Using a Sheetrock screw they can pull loose plaster back to their lathes. These small beauties can turn a rip out job into a repair job, saving thousands of dollars.
After caulking your cracks, run the six inch knife across them with compound, or plaster. Apply thin coats and make sure to let them dry thoroughly between coats. Keep using a larger knife with each coat. The feathering technique explained before runs true here. Have fun with it. Remember one very important thing, when you stucco the next coat can fix anything.
The Benefits Of Stucco Installation At Homes
There are three common types of stucco finishes you might choose from when applying the exterior wall to your home. These finishes include wet dashes, dry dashes, and float finishes.
The wet dashes include many different variations of stucco finishes you might choose to apply to your home. These finishes include the rough cast, pebble dash, spatter dash, broom dash, and even the sand dash. The pebble dash or the rough cast is simple to obtain by throwing the mixture on to the wall by using a paddle. The mixture will include grout and pebbles. You will throw the mixture against the fresh coat of mortar.
The spatter dash can be obtained in a similar fashion but instead using a thinner mixture of cement and coarse sand. Some people choose to use stone screenings instead of sand. This mixture is dashed against the mortar. The sand spray and the broom dash mixtures are used by actually applying the mixture to the mortar by using a long fiber brush or a whisk broom. You do not throw the mixture but apply it. The reason these finishes are called wet finishes is because you apply the finish to the mortar while it is still fresh.
The dry dash stucco finish is another common finish people prefer on their house. When obtaining the dry dash look, you will throw clean pebbles, pieces of shell, or even stone chips against the mortar right before it is hardened. It is important to try to uniformly distribute the mixture across the wall so the outcome looks nice. In most cases, you will have to push the pieces of rock into place by using drywall finishing tools like a float. However, you should not rub the surface once the pieces are embedded into the mortar. The dry dash is a more difficult finish to apply because it takes more time and you have to be more careful to evenly distribute the rocks and pebbles.
Float stucco finishes are another popular option to use on the exterior wall of a home. This type of finish is accomplished by applying the coating once the mortar has begun to harden. This type of finish requires a thin finish coat and needs to be straightened before you begin floating. Once the stucco has begun to stiffen, water needs to be dashed on the surface with a brush. Float finishes are performed by professional workmen with experience and skill. Not many homeowners attempt to do this type of finish on their home.
There are three different types of stucco finishes you might choose from if you are looking for a new siding for the exterior of your home. These types of finishes include wet dashes, dry dashes, and float finishes. Wet and dry dashes are the most common if you are thinking of performing this project on your own. If you would like a float finish on the outside of your home and you have never done this before then you might consider hiring a professional to assist you.