How Do You Select the Best Stucco Repair Company in Pahrump?
So you’ve made the decision to have stucco applied to your home. Or, maybe you just need a repair. Either way, you’ll need to look up stucco contractors in Pahrump so that the project can be completed. You may be tempted to just open up a phone book and call the first contractor with a big ad, but that is not the way to go. Just about anyone can take out an ad, and having a larger one only means that they spent a little more money on advertising. Like any other skilled trade, learning how to apply stucco is not only an art but a science as well. Having the proper insurance, bonding, employees, portfolio of satisfied clients and ethical business practices should be the criteria you base hiring a contractor on. Doing an initial background check on a potential contractor now will save you copious amounts of work later.
First, you need to establish exactly what your project will entail. Then you need to contact a few contractors and ask them for a cost quote. It’s a good idea to let them know right away that you are going to be speaking to several contractors to see what their bids are. This can save you time when trying to negotiate a good price. Throw in some terminology about your specific project if you can. You will appear to be more knowledgeable than the average customer, so you will be less likely to be taken advantage of. Once you have gotten a few quotes, look for the median price. A good contractor will price fairly. Too low of a price may indicate an inexperienced contractor, while a high price may be a predatory contractor. Find the three or four contractors that are close to the median price and contact them for more information.
Qualified stucco contractors will have up to date insurance and licensing. This information will either be on hand, or in their office. Asking to view or make a copy of their paperwork is neither rude nor uncommon. If a contractor acts insulted or repeatedly gives excuses as to why the paperwork cannot be produced, you probably shouldn’t do business with them. Whether these are stalling tactics or they are just really unorganized, they are indicators of an unprofessional business person.
Stucco Contractors - Tips to Hiring Quality Contractors
Stucco is a material used to cover concrete, brick or cinder block, primarily for exterior construction. Stucco is made of aggregate like sand or cement, binder and water and applied to a surface while it is wet. Often sprayed on, stucco hardens to a solid surface as is dries. Modern stucco often includes acrylic fiber and other synthetic materials that add strength and weather-proofing properties. Stucco stands up to many climates, and can last for decades. Stucco that has cracks, holes or other damage can be repaired by spraying on new stucco.
You May Also Like
- How to Apply Stucco Over Wood Siding
Stucco is a building material that is used to provide a textured finish to walls, ceilings and other surfaces. Its a great...
- How to Paint a Stucco House
Stucco is a building material that dates back to the ancient civilizations. A mixture of cement, sand and water, stucco is highly...
- How to Apply Stucco Over Old Stucco
Stucco is a building material made from Portland cement, sand, lime and water. It has been used for centuries to finish exterior...
- How to Remove Spray Paint From Stucco
In the old days, exterior painting projects took quite a bit longer than they do today. Before the advent of electric and...
- How to Apply Stucco Spray
Stucco spray is a simple and inexpensive way to conceal slight blemishes over large expanses of ceiling or walls. Workers typically perform...
- How to Tell If My Siding Is Synthetic Stucco
Synthetic stucco, also known as "exterior insulation and finishing system" or EIFS, has been used since the 1950s as a highly efficient,...
How to Patch Exterior Stucco Cracks
Stucco is a cement-based siding product that is extremely popular around the country. Compared to other siding materials, it fairly easy to maintain and repair. This article discusses how to repair cracks and gouges, and painting stucco. Traditional stucco is a mixture of Portland cement, lime, sand, and water. It is usually about 3/4 inch thick, very porous, and holds on to paint very well. Color can also be mixed into the finishing coat of stucco, eliminating the need to paint.
Stucco is tough, but brittle and can sometimes crack as a house shifts or settles. Hairline cracks should not be repaired, so you do not have to try to repair every crack. If you cannot get your fingernail into the crack, paint will usually fill it. For cracks up to 1/4 inch wide, you can repair them with a high-quality, exterior grade, acrylic latex caulk.
Clean loose debris out of the crack using a V-shaped object to get down in the crack. Then you can brush it, or use a vacuum cleaner. Caulk the crack with a paintable silicone caulk and smooth it out with your finger. Using your finger makes it easier to exactly match the existing texture. Use the 50-year kind of caulk for best results.
Wipe off excess caulking with a damp sponge in all directions to clean the rough texture. Here is a trick. Put some fine texturing sand in the palm of your hand and blow the sand to scatter it onto the wet caulk. This will roughen up the surface making it less noticeable.
Repairing wider cracks and gouges
For this job, you need to use a stucco patching compound. In order for the material to hold properly, exactly the right amount of water must be added. Follow the manufacturer's directions carefully. Thoroughly clean the crack or gouge as you did for small cracks. Use a putty knife or trowel to fill the area with a latex patching product. Thin the patch compound to the consistency of something like pancake batter. Dab a paintbrush into the wet material and holding one hand between the paintbrush and the wall, hit the brush handle against your hand splattering the material onto the repair area. This technique will match the texture of the surrounding stucco. You can smooth it out with a putty knife or trowel to the texture you want after the compound hardens a little bit.
For smaller jobs, use a roller. Use an airless sprayer for larger jobs. For best results, do not use a paintbrush for stucco other than to add texture. Spray the paint onto the surface and then use a 3/4 inch to 1 inch deep nap roller to work the paint into the surface for uniform texture. It usually requires two coats to cover stucco sufficiently because stucco is so porous. It may also require a second coat to cover small cracks and your repairs.