How to Paint Stucco the Right Way
If your home improvement project involves stucco in Summerlin South, you will want to be sure you find the right contractor for the job. It is always important to hire good contractors, but it is especially important when they will be doing work such as stucco installation, which is not as common as other contracting duties. You need to work with a people who know how do to the job properly, so you can be sure it will get done right the first time.
When you get the bids, make sure to ask if the work will be guaranteed once it is completed. A quality stucco contractor will stand firmly behind their work, so don’t hesitate to ask this question. If the labor and material are not covered by some form of guarantee, you should quickly move on to the next bid. There are plenty of contractors out there who are willing to stand behind their work, so there is no reason to work with one who isn’t.
Stucco can be messy business. Make sure there is a plan in place to protect the rest of your property from the mess that can be made when stucco is put in. You don’t want to be left with a huge cleanup project after your contractor has left the job site, so ask specific questions as to how they will keep the rest of your property as clean as possible.
Hiring a stucco contractor doesn’t need to be a long and drawn out process, as long as you know what you are looking for from the start. Use the points above to guide your search, and only hire a contractor once you are fully satisfied that they are the perfect selection for the work that you need completed.
What to Know About Exterior Stucco Contractors
Stucco is a cement-based siding product that is extremely popular around the country. Compared to other siding materials, it fairly easy to maintain and repair. This article discusses how to repair cracks and gouges, and painting stucco. Traditional stucco is a mixture of Portland cement, lime, sand, and water. It is usually about 3/4 inch thick, very porous, and holds on to paint very well. Color can also be mixed into the finishing coat of stucco, eliminating the need to paint.
Stucco is tough, but brittle and can sometimes crack as a house shifts or settles. Hairline cracks should not be repaired, so you do not have to try to repair every crack. If you cannot get your fingernail into the crack, paint will usually fill it. For cracks up to 1/4 inch wide, you can repair them with a high-quality, exterior grade, acrylic latex caulk.
Clean loose debris out of the crack using a V-shaped object to get down in the crack. Then you can brush it, or use a vacuum cleaner. Caulk the crack with a paintable silicone caulk and smooth it out with your finger. Using your finger makes it easier to exactly match the existing texture. Use the 50-year kind of caulk for best results.
Wipe off excess caulking with a damp sponge in all directions to clean the rough texture. Here is a trick. Put some fine texturing sand in the palm of your hand and blow the sand to scatter it onto the wet caulk. This will roughen up the surface making it less noticeable.
Repairing wider cracks and gouges
For this job, you need to use a stucco patching compound. In order for the material to hold properly, exactly the right amount of water must be added. Follow the manufacturer's directions carefully. Thoroughly clean the crack or gouge as you did for small cracks. Use a putty knife or trowel to fill the area with a latex patching product. Thin the patch compound to the consistency of something like pancake batter. Dab a paintbrush into the wet material and holding one hand between the paintbrush and the wall, hit the brush handle against your hand splattering the material onto the repair area. This technique will match the texture of the surrounding stucco. You can smooth it out with a putty knife or trowel to the texture you want after the compound hardens a little bit.
For smaller jobs, use a roller. Use an airless sprayer for larger jobs. For best results, do not use a paintbrush for stucco other than to add texture. Spray the paint onto the surface and then use a 3/4 inch to 1 inch deep nap roller to work the paint into the surface for uniform texture. It usually requires two coats to cover stucco sufficiently because stucco is so porous. It may also require a second coat to cover small cracks and your repairs.
How to Fix a Stucco Wall
The stucco method of repair work is an absolute must for people in the maintenance field. Holes in the wall just seem to happen. Cracks in plaster ceilings can be a nightmare to repair. Any one who has owned an apartment building know the value of someone with the ability make these repairs.
When you do have a hole in a wall or ceiling, first thing is to back the hole with something so the stucco doesn't fall through. Holes up to the size of what a doorknob might make, can be repaired in this way. After filling the hole with backing, use Sheetrock compound or plaster to fill the hole even or a little above the surface of the wall. A 6 inch putty knife is great to start with.
Next apply Sheetrock tape over the hole and past the edge at least several inches. Use the putty knife to push the tape into the wet mud. Apply a second coat of compound or plaster over the tape. Now we wait. A household fan can be used to help speed the drying time.
Your repair is dry when it turns completely white, do not try to sand or make it any smoother while it's drying. This will only make a mess you'll have to sand out later. You'll have plenty of time to make it right on the next coat.
Apply another coat of your product over the first. This time use a ten inch putty knife and expand the layer you put on past the edge of the previous coat. First pull the knife across the repair centered. Next pass, you'll stay half on and half off your patch putting slightly more pressure on the half off, this will smooth the edge. Then repeat the half on half off method on the other half, making sure to always put more pressure on the half that's off.
If you have a badly cracked ceiling, this type of repair can be used to skim coat a small area or an entire ceiling. Repairs to cracks can be made in the same way as we fixed the hole. A vinyl adhesive caulking, can take the place of our newspaper. This will help to keep the cracks from reappearing. Tape is also not necessary with this method.
If you have loose plaster. Ceiling washers as their called are available at most hardware stores as well as building supply houses. These are a large beveled fender washer with a hole in the center. Using a Sheetrock screw they can pull loose plaster back to their lathes. These small beauties can turn a rip out job into a repair job, saving thousands of dollars.
After caulking your cracks, run the six inch knife across them with compound, or plaster. Apply thin coats and make sure to let them dry thoroughly between coats. Keep using a larger knife with each coat. The feathering technique explained before runs true here. Have fun with it. Remember one very important thing, when you stucco the next coat can fix anything.