Stucco Repair Companies in Desert Shores, Nevada

Stucco House Problems

If your home improvement project involves stucco in Desert Shores, you will want to be sure you find the right contractor for the job. It is always important to hire good contractors, but it is especially important when they will be doing work such as stucco installation, which is not as common as other contracting duties. You need to work with a people who know how do to the job properly, so you can be sure it will get done right the first time.

Stucco Cracks When To Worry

When you get the bids, make sure to ask if the work will be guaranteed once it is completed. A quality stucco contractor will stand firmly behind their work, so don’t hesitate to ask this question. If the labor and material are not covered by some form of guarantee, you should quickly move on to the next bid. There are plenty of contractors out there who are willing to stand behind their work, so there is no reason to work with one who isn’t.

Stucco can be messy business. Make sure there is a plan in place to protect the rest of your property from the mess that can be made when stucco is put in. You don’t want to be left with a huge cleanup project after your contractor has left the job site, so ask specific questions as to how they will keep the rest of your property as clean as possible.

Stucco Replacement Cost

Hiring a stucco contractor doesn’t need to be a long and drawn out process, as long as you know what you are looking for from the start. Use the points above to guide your search, and only hire a contractor once you are fully satisfied that they are the perfect selection for the work that you need completed.

Interesting Facts About Stucco Nobody Has Ever Told You

Stucco has been use to protect and decorate exterior and interior walls and ceilings for many centuries. Stucco is available in dozens of textures, thousands of colors and is currently the cladding of choice for most new construction and remodel or restoration projects.

The two main categories of exterior stucco that encompass dozens of different systems are Hard Coat Stucco and EIFS (Exterior Insulation and Finish System). Hard Coat Stucco is the preferred system for residential or multifamily construction, and is being used increasingly for commercial projects since it is more economical. EIFS is more commonly used for commercial building projects, but is often also used for high-end custom homes.

Hard Coat Stucco is typically applied in 2-3 coats with a cementitious base coat. Two commonly used hard coat stucco systems are called One Coat Stucco and Three Coat Stucco. Traditional Three Coat Stucco consists of two coats of a cement base and one finish coat. One Coat Stucco is actually a two-coat process but instead of two base coats it consists of one cementitious base coat with one finish coat. In the last few decades One Coat Stucco has become much more popular simply because of the cost. The materials used and application process are virtually the same for both systems, other than the exception of One Coat Stucco taking fewer steps and less time. The design ability and performance between the two systems are also the same, although Three Coat Stucco is typically stronger and will crack less in most circumstances.

The finish coat application of both hard coat systems is the same. There are numerous finish options but they can be consolidated into a few categories which are: Integrally Colored Stucco, Painted Stucco, and Acrylic Finishes. Colored cement finishes or "colored stucco" was the popular choice over Three Coat Stucco for most of the 20th century. It is simply a mixture of cement, lime, sand and pigment. It is inexpensive and easy to apply, however, if the base coat cracks the finish is almost guaranteed to crack. Colored Stucco will stain easily, is hard to repair, and allows water to pass freely through it (which can be good or bad depending on what part of the country the system is applied within). It is usually applied by hand and can achieve virtually any finish imaginable.

Painted Stucco has been around almost as long, and is the majority of the finishes being used today. Painted Stucco is the same mixture of materials less the color, so it is applied the same and will achieve all the textures that integrally colored stucco will. The final step with Painted Stucco is the paint application. The paint, or as some like to call "coating", will look more vibrant and is easier to patch. Color options are vast and it is important that a good quality stucco paint is used. The most desired stucco finish today is Acrylic Stucco or Acrylic Finish. Some will call this system Synthetic Stucco, which is somewhat correct since it is a synthetic finish, however it is not a synthetic system.

Acrylic Finish is available in as many colors as a paint and has the same chemical make up as paint, but is a much thicker application. This does raise the cost of the overall system, but offers many benefits that the other two finishes do not. Acrylic Stucco will bridge most all hairline cracks and does not allow water to travel freely into the system, which is a huge benefit in freeze/thaw zones. Acrylic Stucco will keep it's look and typically will not require any maintenance for many years, whereas painted stucco must be repainted and repaired within a few years. Colored Stucco stains easily, will show every crack and is very difficult to repair.

EIFS is a full synthetic system or what most will call Synthetic Stucco. EIFS systems weigh much less than traditional stucco and are much more flexible. Although most EIFS adhesives and base coats are cement based, they are heavily polymer modified so they are considered synthetic. These type of systems have been used successfully for many decades but are much newer in the stucco world. Most all EIFS systems use EPS (Expanded Polystyrene) insulation board which is usually adhesively attached to the substrate and sometimes mechanically attached. The EPS adds insulation to the wall assembly, absorbs movement better than any other stucco cladding used today, and adds many design options.

The original or traditional EIFS systems all used a cement-based adhesive and/or mechanical fasteners for the EPS, fiberglass netting for reinforcement and to gauge base coat thickness, cement base coat, and an acrylic finish. These systems are known as Barrier EIFS. Since these systems are so watertight, they've had some problems such as not allowing water to escape after it had travelled into the system because of improper application and flashing. The industry quickly designed Drainage EIFS or Water Managed EIFS which some manufacturers had and promoted before these issues arrived. Drainage EIFS systems have been very popular in recent years and include added or altered components such as notched or channeled EPS, plastic trim, trowel or roller-applied waterproof coatings. These systems seem to have remedied the water drainage problem of years past. The finish coat options for EIFS are not as vast as they are for Hard Coat Stucco. Since EIFS is a "soft system" or synthetic system, cement finishes will not work unless they are acrylic or polymer modified.

Most EIFS manufacturers have their recommended systems and will not warranty their products if deviated from the original specifications. Almost every final coat for EIFS consists of an acrylic emulsion and marble or silica sand finish that is hand-troweled over the base coat. Acrylic finish is integrally colored and very flexible. There are a few standard textures that acrylic finishes provide, including Smooth Finish, Sand Finish, and Rilled or Swirl Finish. These finishes, which are expensive, are usually applied in one coat at a thickness of 5/32" or less. Many different textures are possible by multilayering an acrylic finish.

Stucco Waterproofing

How to Fix a Stucco Wall

If you are building a new house, then you will have to face a few annoying tasks in the process. One such task is, getting your house insulated. Insulation is one of the important jobs when building a new house, as it will save you from cold and moisture during the winter season. But, choosing the right type of insulation could be a lot frustrating, therefore I would suggest you that you should opt for the stucco insulation.

This is perhaps the most convenient and affordable way of getting your house insulated from all sorts of extreme weather. I would like to mention a few important facts related to stucco installation, which will help you get a better idea about this particular technique of insulation. Stucco insulation will create a permanent barrier in your house against all sorts of weather conditions.

I have seen many people using a metal backing before applying the stucco, which is a good practice. You can do the same with the help of a contractor, as they can finish the task quickly and easily. You will find a number of options when applying for this type of thing. This will prove to be a good barrier because it is applied in three different layers. A layer of spray is also applied to fill in all the holes that exist at the time of placing those layers.

You can't get such kind of insulation in a Styrofoam or fiberglass, like the one you get from the stucco insulation. Stucco is better because it has the ability to capture the empty spaces of the surfaces on which it is applied to. This is an important feature and must not be overlooked. You can use stucco in many different places where other insulation can't be used. There are a number of places where insulation needs to be done in a proper way or else, your home will not stay warm and dry.

I would like to tell you that there are so many options available for you these days regarding the best insulation. There is nothing much to worry about the mold that grows on the surface of the walls because stucco doesn't let that mold grow. Mold can create difficulties for people to breathe in the house and it is one of the most difficult things to get rid of as well. I have seen many houses in which the mold has done a lot of damage without even being coming into the notice of the members of the house. But, stucco will not let the mold grow, thus saving your house for a long period of time.

You can apply the stucco insulation on the exterior of the walls or sidings. There is a particular reason behind it, which is, it will work much better as a barrier than the insulating materials, which I have mentioned above. You must pay an extra attention towards having a good insulation for the building. The stucco installation will keep all the cold as well as the moisture out of the building.

The stucco insulation will acts as a water resistant, which is will not just help in keeping the flood out, but also the moisture that arises with the changes in the temperature, storms and many other things. It doesn't matter, what kind of reason is creating moisture, this insulation will eliminate all of it. Stucco is not something, which will wear off on its own, if you want to get rid of it, then you have to remove it. But, I don't see any reason to get rid of the stucco, as it provides so many benefits to you.

Stucco Sealer

Stucco Repair in Las Vegas, Nevada