Repair Damaged Stucco in Sloan, Nevada

Stucco Contractors - Tips to Hiring Quality Contractors

If your home improvement project involves stucco in Sloan, you will want to be sure you find the right contractor for the job. It is always important to hire good contractors, but it is especially important when they will be doing work such as stucco installation, which is not as common as other contracting duties. You need to work with a people who know how do to the job properly, so you can be sure it will get done right the first time.

New Stucco

When you get the bids, make sure to ask if the work will be guaranteed once it is completed. A quality stucco contractor will stand firmly behind their work, so don’t hesitate to ask this question. If the labor and material are not covered by some form of guarantee, you should quickly move on to the next bid. There are plenty of contractors out there who are willing to stand behind their work, so there is no reason to work with one who isn’t.

Stucco can be messy business. Make sure there is a plan in place to protect the rest of your property from the mess that can be made when stucco is put in. You don’t want to be left with a huge cleanup project after your contractor has left the job site, so ask specific questions as to how they will keep the rest of your property as clean as possible.

Stucco Sealer

Hiring a stucco contractor doesn’t need to be a long and drawn out process, as long as you know what you are looking for from the start. Use the points above to guide your search, and only hire a contractor once you are fully satisfied that they are the perfect selection for the work that you need completed.

How to Repair Stucco Siding on Your Home

Stucco is a cement-based siding product that is extremely popular around the country. Compared to other siding materials, it fairly easy to maintain and repair. This article discusses how to repair cracks and gouges, and painting stucco. Traditional stucco is a mixture of Portland cement, lime, sand, and water. It is usually about 3/4 inch thick, very porous, and holds on to paint very well. Color can also be mixed into the finishing coat of stucco, eliminating the need to paint.

Repairing cracks

Stucco is tough, but brittle and can sometimes crack as a house shifts or settles. Hairline cracks should not be repaired, so you do not have to try to repair every crack. If you cannot get your fingernail into the crack, paint will usually fill it. For cracks up to 1/4 inch wide, you can repair them with a high-quality, exterior grade, acrylic latex caulk.

Clean loose debris out of the crack using a V-shaped object to get down in the crack. Then you can brush it, or use a vacuum cleaner. Caulk the crack with a paintable silicone caulk and smooth it out with your finger. Using your finger makes it easier to exactly match the existing texture. Use the 50-year kind of caulk for best results.

Wipe off excess caulking with a damp sponge in all directions to clean the rough texture. Here is a trick. Put some fine texturing sand in the palm of your hand and blow the sand to scatter it onto the wet caulk. This will roughen up the surface making it less noticeable.

Repairing wider cracks and gouges

For this job, you need to use a stucco patching compound. In order for the material to hold properly, exactly the right amount of water must be added. Follow the manufacturer's directions carefully. Thoroughly clean the crack or gouge as you did for small cracks. Use a putty knife or trowel to fill the area with a latex patching product. Thin the patch compound to the consistency of something like pancake batter. Dab a paintbrush into the wet material and holding one hand between the paintbrush and the wall, hit the brush handle against your hand splattering the material onto the repair area. This technique will match the texture of the surrounding stucco. You can smooth it out with a putty knife or trowel to the texture you want after the compound hardens a little bit.

Painting stucco

For smaller jobs, use a roller. Use an airless sprayer for larger jobs. For best results, do not use a paintbrush for stucco other than to add texture. Spray the paint onto the surface and then use a 3/4 inch to 1 inch deep nap roller to work the paint into the surface for uniform texture. It usually requires two coats to cover stucco sufficiently because stucco is so porous. It may also require a second coat to cover small cracks and your repairs.

ReStucco A House

Making The Proper Repair Of Walls And Ceilings Using Stucco

There are three common types of stucco finishes you might choose from when applying the exterior wall to your home. These finishes include wet dashes, dry dashes, and float finishes.

The wet dashes include many different variations of stucco finishes you might choose to apply to your home. These finishes include the rough cast, pebble dash, spatter dash, broom dash, and even the sand dash. The pebble dash or the rough cast is simple to obtain by throwing the mixture on to the wall by using a paddle. The mixture will include grout and pebbles. You will throw the mixture against the fresh coat of mortar.

The spatter dash can be obtained in a similar fashion but instead using a thinner mixture of cement and coarse sand. Some people choose to use stone screenings instead of sand. This mixture is dashed against the mortar. The sand spray and the broom dash mixtures are used by actually applying the mixture to the mortar by using a long fiber brush or a whisk broom. You do not throw the mixture but apply it. The reason these finishes are called wet finishes is because you apply the finish to the mortar while it is still fresh.

The dry dash stucco finish is another common finish people prefer on their house. When obtaining the dry dash look, you will throw clean pebbles, pieces of shell, or even stone chips against the mortar right before it is hardened. It is important to try to uniformly distribute the mixture across the wall so the outcome looks nice. In most cases, you will have to push the pieces of rock into place by using drywall finishing tools like a float. However, you should not rub the surface once the pieces are embedded into the mortar. The dry dash is a more difficult finish to apply because it takes more time and you have to be more careful to evenly distribute the rocks and pebbles.

Float stucco finishes are another popular option to use on the exterior wall of a home. This type of finish is accomplished by applying the coating once the mortar has begun to harden. This type of finish requires a thin finish coat and needs to be straightened before you begin floating. Once the stucco has begun to stiffen, water needs to be dashed on the surface with a brush. Float finishes are performed by professional workmen with experience and skill. Not many homeowners attempt to do this type of finish on their home.

There are three different types of stucco finishes you might choose from if you are looking for a new siding for the exterior of your home. These types of finishes include wet dashes, dry dashes, and float finishes. Wet and dry dashes are the most common if you are thinking of performing this project on your own. If you would like a float finish on the outside of your home and you have never done this before then you might consider hiring a professional to assist you.

Paint For Stucco

Stucco Repair in Las Vegas, Nevada