Addressing Stucco Failure
If your home improvement project involves stucco in Bard, you will want to be sure you find the right contractor for the job. It is always important to hire good contractors, but it is especially important when they will be doing work such as stucco installation, which is not as common as other contracting duties. You need to work with a people who know how do to the job properly, so you can be sure it will get done right the first time.
When you get the bids, make sure to ask if the work will be guaranteed once it is completed. A quality stucco contractor will stand firmly behind their work, so don’t hesitate to ask this question. If the labor and material are not covered by some form of guarantee, you should quickly move on to the next bid. There are plenty of contractors out there who are willing to stand behind their work, so there is no reason to work with one who isn’t.
Stucco can be messy business. Make sure there is a plan in place to protect the rest of your property from the mess that can be made when stucco is put in. You don’t want to be left with a huge cleanup project after your contractor has left the job site, so ask specific questions as to how they will keep the rest of your property as clean as possible.
Hiring a stucco contractor doesn’t need to be a long and drawn out process, as long as you know what you are looking for from the start. Use the points above to guide your search, and only hire a contractor once you are fully satisfied that they are the perfect selection for the work that you need completed.
Stucco House Problems
Stucco is almost as old as architecture itself. Various mixes of cement, plaster, sand and other materials work together to form a hard, long-lasting surface that sheds rain and resists rot. House settling and seasonal expansion and contraction, however, can open up cracks that let in the elements and mar your home's beauty. Many of these flaws are not hard to repair. If you have stucco cracks on the underside of a soffit, for example, you'll find the repair a fairly straightforward afternoon project.
How to Repair Stucco Siding on Your Home
The stucco method of repair work is an absolute must for people in the maintenance field. Holes in the wall just seem to happen. Cracks in plaster ceilings can be a nightmare to repair. Any one who has owned an apartment building know the value of someone with the ability make these repairs.
When you do have a hole in a wall or ceiling, first thing is to back the hole with something so the stucco doesn't fall through. Holes up to the size of what a doorknob might make, can be repaired in this way. After filling the hole with backing, use Sheetrock compound or plaster to fill the hole even or a little above the surface of the wall. A 6 inch putty knife is great to start with.
Next apply Sheetrock tape over the hole and past the edge at least several inches. Use the putty knife to push the tape into the wet mud. Apply a second coat of compound or plaster over the tape. Now we wait. A household fan can be used to help speed the drying time.
Your repair is dry when it turns completely white, do not try to sand or make it any smoother while it's drying. This will only make a mess you'll have to sand out later. You'll have plenty of time to make it right on the next coat.
Apply another coat of your product over the first. This time use a ten inch putty knife and expand the layer you put on past the edge of the previous coat. First pull the knife across the repair centered. Next pass, you'll stay half on and half off your patch putting slightly more pressure on the half off, this will smooth the edge. Then repeat the half on half off method on the other half, making sure to always put more pressure on the half that's off.
If you have a badly cracked ceiling, this type of repair can be used to skim coat a small area or an entire ceiling. Repairs to cracks can be made in the same way as we fixed the hole. A vinyl adhesive caulking, can take the place of our newspaper. This will help to keep the cracks from reappearing. Tape is also not necessary with this method.
If you have loose plaster. Ceiling washers as their called are available at most hardware stores as well as building supply houses. These are a large beveled fender washer with a hole in the center. Using a Sheetrock screw they can pull loose plaster back to their lathes. These small beauties can turn a rip out job into a repair job, saving thousands of dollars.
After caulking your cracks, run the six inch knife across them with compound, or plaster. Apply thin coats and make sure to let them dry thoroughly between coats. Keep using a larger knife with each coat. The feathering technique explained before runs true here. Have fun with it. Remember one very important thing, when you stucco the next coat can fix anything.