How Do You Select the Best Stucco Repair Company in Henderson?
So you’ve made the decision to have stucco applied to your home. Or, maybe you just need a repair. Either way, you’ll need to look up stucco contractors in Henderson so that the project can be completed. You may be tempted to just open up a phone book and call the first contractor with a big ad, but that is not the way to go. Just about anyone can take out an ad, and having a larger one only means that they spent a little more money on advertising. Like any other skilled trade, learning how to apply stucco is not only an art but a science as well. Having the proper insurance, bonding, employees, portfolio of satisfied clients and ethical business practices should be the criteria you base hiring a contractor on. Doing an initial background check on a potential contractor now will save you copious amounts of work later.
First, you need to establish exactly what your project will entail. Then you need to contact a few contractors and ask them for a cost quote. It’s a good idea to let them know right away that you are going to be speaking to several contractors to see what their bids are. This can save you time when trying to negotiate a good price. Throw in some terminology about your specific project if you can. You will appear to be more knowledgeable than the average customer, so you will be less likely to be taken advantage of. Once you have gotten a few quotes, look for the median price. A good contractor will price fairly. Too low of a price may indicate an inexperienced contractor, while a high price may be a predatory contractor. Find the three or four contractors that are close to the median price and contact them for more information.
Qualified stucco contractors will have up to date insurance and licensing. This information will either be on hand, or in their office. Asking to view or make a copy of their paperwork is neither rude nor uncommon. If a contractor acts insulted or repeatedly gives excuses as to why the paperwork cannot be produced, you probably shouldn’t do business with them. Whether these are stalling tactics or they are just really unorganized, they are indicators of an unprofessional business person.
Stucco Contractors - Tips to Hiring Quality Contractors
Stucco has come under fire lately, mainly due to problems with water damage. The damages that occur need immediate attention. There is no permanent solution to repairing synthetic stucco, but these steps can give you temporary solutions.
You May Also Like
- Comparison of Stucco Vs. Synthetic Stucco
Stucco is a cement-like coating that is spread on the exterior walls of homes and other buildings. Exterior insulating finishing systems are...
- How to Repair Stucco
How to Repair Stucco. Stucco looks great - unless it has a long, ugly crack running through it. Here's how to get...
- How to Paint Synthetic Stucco
Synthetic stucco, or EIFS (exterior insulation finish systems), is a composite siding made up of layers of fiberglass mesh, foam insulating board...
- How to Tell If My Siding Is Synthetic Stucco
Synthetic stucco, also known as "exterior insulation and finishing system" or EIFS, has been used since the 1950s as a highly efficient,...
Stucco House Problems
The stucco method of repair work is an absolute must for people in the maintenance field. Holes in the wall just seem to happen. Cracks in plaster ceilings can be a nightmare to repair. Any one who has owned an apartment building know the value of someone with the ability make these repairs.
When you do have a hole in a wall or ceiling, first thing is to back the hole with something so the stucco doesn't fall through. Holes up to the size of what a doorknob might make, can be repaired in this way. After filling the hole with backing, use Sheetrock compound or plaster to fill the hole even or a little above the surface of the wall. A 6 inch putty knife is great to start with.
Next apply Sheetrock tape over the hole and past the edge at least several inches. Use the putty knife to push the tape into the wet mud. Apply a second coat of compound or plaster over the tape. Now we wait. A household fan can be used to help speed the drying time.
Your repair is dry when it turns completely white, do not try to sand or make it any smoother while it's drying. This will only make a mess you'll have to sand out later. You'll have plenty of time to make it right on the next coat.
Apply another coat of your product over the first. This time use a ten inch putty knife and expand the layer you put on past the edge of the previous coat. First pull the knife across the repair centered. Next pass, you'll stay half on and half off your patch putting slightly more pressure on the half off, this will smooth the edge. Then repeat the half on half off method on the other half, making sure to always put more pressure on the half that's off.
If you have a badly cracked ceiling, this type of repair can be used to skim coat a small area or an entire ceiling. Repairs to cracks can be made in the same way as we fixed the hole. A vinyl adhesive caulking, can take the place of our newspaper. This will help to keep the cracks from reappearing. Tape is also not necessary with this method.
If you have loose plaster. Ceiling washers as their called are available at most hardware stores as well as building supply houses. These are a large beveled fender washer with a hole in the center. Using a Sheetrock screw they can pull loose plaster back to their lathes. These small beauties can turn a rip out job into a repair job, saving thousands of dollars.
After caulking your cracks, run the six inch knife across them with compound, or plaster. Apply thin coats and make sure to let them dry thoroughly between coats. Keep using a larger knife with each coat. The feathering technique explained before runs true here. Have fun with it. Remember one very important thing, when you stucco the next coat can fix anything.