Stucco Chimney Repair in Summerlin West, Nevada

Addressing Stucco Failure

If your home improvement project involves stucco in Summerlin West, you will want to be sure you find the right contractor for the job. It is always important to hire good contractors, but it is especially important when they will be doing work such as stucco installation, which is not as common as other contracting duties. You need to work with a people who know how do to the job properly, so you can be sure it will get done right the first time.

Stucco Replacement Cost

When you get the bids, make sure to ask if the work will be guaranteed once it is completed. A quality stucco contractor will stand firmly behind their work, so don’t hesitate to ask this question. If the labor and material are not covered by some form of guarantee, you should quickly move on to the next bid. There are plenty of contractors out there who are willing to stand behind their work, so there is no reason to work with one who isn’t.

Stucco can be messy business. Make sure there is a plan in place to protect the rest of your property from the mess that can be made when stucco is put in. You don’t want to be left with a huge cleanup project after your contractor has left the job site, so ask specific questions as to how they will keep the rest of your property as clean as possible.

Stucco Siding Panels

Hiring a stucco contractor doesn’t need to be a long and drawn out process, as long as you know what you are looking for from the start. Use the points above to guide your search, and only hire a contractor once you are fully satisfied that they are the perfect selection for the work that you need completed.

Stucco Options

Stucco is another name for Portland Cement Plaster. It can be applied both inside and outside. It can be colored and textured, and is fairly easy to keep in good repair. Stucco is best used in warmer climates, as repeated freezes and thaws can cause it to crack. There are one-coat stucco applications available, although it is typically applied in three coats for best results. It does not adhere well to vinyl or aluminum siding, so it is best to remove old siding before applying mesh and stucco. Remove soffits before application, although you may wish to replace them afterward. Stucco can be applied with various tools, brushes or sponges to achieve different textures.

Resources

  • What is Stucco?
  • Purchase stucco application and texturing tools at All-Wall.
  • Read about asbestos in your home at the EPA website
  • View stucco texture images

You May Also Like

  • How to Apply Stucco

    Applying stucco is an easy, low-stress way to beautify your house. You get to exercise some of your creativity, as well as...

  • How to Apply a Knockdown Texture to Stucco

    New paint can freshen up a room, but sometimes you may like to go further and add a textured dimension to the...

  • How to Paint Rough Stucco With a Roller

    Stucco is a masonry adhesive usually applied to a building's exterior for protection or decoration. Applied as a wet paste, stucco hardens...

  • How to do Knockdown Texture Stucco

    Stucco texture adds ambiance and a luxuriant feel to a room, but can be difficult to apply. Various texture techniques create a...

  • Different Kinds of Stucco Finishes

    Stucco materials add a durable finish to your home and can add to its curb appeal when you pick a finish that...

Stucco Sealer

Stucco Contractors - Tips to Hiring Quality Contractors

What's Stucco?

Stucco has been used in architectural structures since the Greek and Roman era and during the Renaissance. It spread throughout Europe and gradually became popular in America. Stucco is a finishing plaster composed of sand, lime, water and other ingredients. It is a strong, attractive and damage resistant covering for walls and ceilings. It is an excellent building material for hot areas as it helps to regulate the temperature. It is non-combustible and its surface burning properties include no flame spread and no smoke development.

Currently, there are two distinct types of Stuccoes -

Traditional/Hard Coat Stucco - This is basically cement mixed Stucco. The traditional stucco is durable and able to withstand harsh environments. It is porous and can breathe, so, dries quickly and resists water damage.

Conventionally, lime was used with sand and water. As lime is slightly soluble, the mixture has a self-healing tendency. At present, stuccoes are usually made up of Portland Cement, sand and water resulting in a hard and brittle variety.

To install hard coat stucco, first the substrate is installed followed by a metal lath and then a coat of stucco is applied with a trowel. It is allowed to set and then another coating is applied. Normally, the process involves a scratch coat, a brown coat and a finish coat (may be colored).

Stucco can also be applied on a paper and wire. The coats should be thicker. The first coat (scratch coat) covers the wire. It needs to be scratched as soon as it sets. The second coat (brown coat) gets bonded to this coat and as usual the finish coat is the outermost layer.

Synthetic Stucco - Since 1950s, a number of houses were built using a variety of synthetic materials resembling stucco. Fibers and synthetic acrylics were added to the cement stucco mixture to add strength and flexibility. In general though, the synthetic stuccoes are less heavy and hence, more susceptible to a hard blow. They are a one-coat stucco system unlike the three-coat traditional ones.

The most common one is EIFS or Exterior Insulation & Finish Systems. They are glued or mechanically attached to the substrate and usually composed of three layers. The innermost layer, mostly made up of polystyrene like material, is a foam insulation board. The second layer is a base coating attached to a fiberglass mesh and the final layer is a finish colored coat. It became popular because of its easy installation, low cost and better insulation properties. The only disadvantage is moisture absorption which causes water damage to the building.

A variety of stucco colors/paints are available. Colorants are inorganic pigments which can adapt with the high pH value of cement. They can be either natural like, Ochers and natural earths or artificial, such as man made Iron Oxides. Natural colorants remain unaffected to UV rays and are more pleasant to our eyes. But, the range of shades and the tinting strength is less when compared to manufactured colors. Man made colors, on the other hand, offer a wider range of shades such as dark blues and greens as well as various earthy tones like, yellow, brown and reds. They also possess excellent UV stability due to the presence of inorganic pigments.

Generally, $6-$9 per square foot is the effective cost for stucco installation. A proper inspection of the building is must before the installation. It is always advised to use a better quality beforehand rather than paying later for damage repair.

Stucco Siding Benefits

Stucco Repair in Las Vegas, Nevada